Module
ESD-ZRG-2SFT8-1200 (4FT)
| Total power | 42W |
| Input voltage | AC90-250V, 50/60Hz |
| Power supply | internal constant current |
| Lighting source | low power 3528/3014/5050 LEDs |
| LED quantity | 576(2*288pcs) |
| Dimension | 1,278mm*166mm*100mm |
| Material | aluminum PCB and housing & PC cover |
| Luminous flux | 2880lm±10% |
| Luminous efficiency | 75–85lm/W |
| Color temperature | 3000-3500K, 6500-9000K |
| Viewing angle | ≤120 ° |
| CRI | Ra﹥70 |
| Working temperature | -20～40℃（-4～104 °F） |
| Environment humidity | <95﹪ |
| Working environment | indoor use |
| Protection rating | IP44 |
| Life-span | 50,000 hours |
| Certification | CE, RoHS and FCC |
| Warranty | 2 years |
Features:
For your specialized lighting needs, it provides lighting fixtures built to withstand the rigors and dangers of emergencies as well as those ever-present in hazardous areas. Our line of explosion proof lighting products is built with user safety as the number one concern. With features resistant to external factors such as heat and pressure, Eastar’s lighting solutions also offer sustainability in our line of explosion proof lighting products.Applications:
1 Explosion-proof, corrosion-proof and dust-proof.2 High quality light source. The attenuation of SMD LED light source is less than 3% by 3000hrs aging test under temperature 50 degrees celsius, high luminous efficiency of single LED.
3 Advanced constant current driver with short circuit protection, open circuit protection, overload protection, etc.
Explosion-proof T8 LED Tube Eelectric Connection
600mm Explosion-proof T8 LED Tube Light Installation
1 Before installation, check whether the power is suitable. The tube must work under the right voltage according to the specification.
2 Cut off the power first for safety
3 Don’t take the tube apart
4 Recommend indoor use
5 Please use it in a ventilation environment and keep it from water.
6 DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative), you will create a short circuit!
1 Before installation, check whether the power is suitable. The tube must work under the right voltage according to the specification.
2 Cut off the power first for safety
3 Don’t take the tube apart
4 Recommend indoor use
5 Please use it in a ventilation environment and keep it from water.
6 DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative), you will create a short circuit!
600mm Explosion-proof T8 LED Tube Spectrum Test Report
600mm Explosion-proof T8 LED Tube Installation
没有评论:
发表评论