http://www.eastarledlighting.com
Module
ZSD-E27-0054-GCW03-A1(warm white)
ZSD-E27-0054-GCP03-A1(natural white)
ZSD-E27-0054-GCC03-A1(cold white)
| Lighting source | 1pc 3W high power LED |
| Input voltage | AC90-250V, 50/60Hz |
| Power supply | internal constant current |
| Dimensio | Φ50mm*63mm |
| Material | aluminum + PMMA lens |
| Beam angle | 30°/45°/60° |
| Lamp holder | E27/E26/E14/GU10 |
| Luminous flux: | 160lm |
| Luminous efficiency | 55–60lm/W |
| Color temperature | 2700-4500K, 4500-6500 K, 6500-9000K |
| Power factor | ≥0.65 |
| CRI | Ra﹥70 |
| Working temperature | -25℃～45℃ |
| Environment humidity | <90﹪ |
| Working environment | indoor use (applicable for dry environment) |
| Protection rating | IP54 |
| Certification | CE, RoHS and UL pending |
| Life-span | 50,000 hrs |
| Weight | 52g (net), 68g (gross) |
| Warranty | 2 years |
Features:
1 Eastar LED spotlight has attractive lampshade looking.
2 Designed as a direct replace of most of spotlight fixtures. 3.high quality light source. The attenuation of high power LED light source is less than 3% by 3,000 hrs aging test under temperature 50 degreess celsius, high luminous efficiency of single LED.
4 Advanced constant current driver with short circuit protection, open circuit protection and overload protection.
2 Designed as a direct replace of most of spotlight fixtures. 3.high quality light source. The attenuation of high power LED light source is less than 3% by 3,000 hrs aging test under temperature 50 degreess celsius, high luminous efficiency of single LED.
4 Advanced constant current driver with short circuit protection, open circuit protection and overload protection.
Applications
Replacement SMD LED spotlight for traditional halogen lamp, such as store, supermarket, especially for museums, art galleries, cosmetic, counters where UV or IR radiation is undesirableLED Spot light Dimension
LED Spot light Eelectric Connection Diagram
LED Spot light Dimension Installation
1 Cut off the power supply before replacing the light
2 Make sure the power-supply voltage is correct before use, or it will shorten the life time or damage it
3 Do not touch the bottom of the metal parts with any part of the body when the lamp is working, or there will be danger of electric shock
4 Ventilated to maintain the working environment
5 Do not touch the bulb surface when the light is on.
1 Cut off the power supply before replacing the light
2 Make sure the power-supply voltage is correct before use, or it will shorten the life time or damage it
3 Do not touch the bottom of the metal parts with any part of the body when the lamp is working, or there will be danger of electric shock
4 Ventilated to maintain the working environment
5 Do not touch the bulb surface when the light is on.
LED Spot lightt Test Report
LED Spot lightt Test Report
LED Spot light Illuminance
没有评论:
发表评论