| Lighting source | 1pc 3W high power LED |
| Input voltage | AC90-250V, 50/60Hz |
| Power supply | internal constant current |
| Dimensio | Φ50mm*63mm |
| Material | aluminum + PMMA lens |
| Beam angle | 30°/45°/60° |
| Lamp holder | E27/E26/E14/GU10 |
| Luminous flux: | 160lm |
| Luminous efficiency | 55–60lm/W |
| Color temperature | 2700-4500K, 4500-6500 K, 6500-9000K |
| Power factor | ≥0.65 |
| CRI | Ra﹥70 |
| Working temperature | -25℃～45℃ |
| Environment humidity | <90﹪ |
| Working environment | indoor use (applicable for dry environment) |
| Protection rating | IP54 |
| Certification | CE, RoHS and UL pending |
| Life-span | 50,000 hrs |
| Weight | 52g (net), 68g (gross) |
| Warranty | 2 years |
Features:
1 Eastar LED spotlight has attractive lampshade looking.
2 Designed as a direct replace of most of spotlight fixtures. 3.high quality light source. The attenuation of high power LED light source is less than 3% by 3,000 hrs aging test under temperature 50 degreess celsius, high luminous efficiency of single LED.
4 Advanced constant current driver with short circuit protection, open circuit protection and overload protection.
2 Designed as a direct replace of most of spotlight fixtures. 3.high quality light source. The attenuation of high power LED light source is less than 3% by 3,000 hrs aging test under temperature 50 degreess celsius, high luminous efficiency of single LED.
4 Advanced constant current driver with short circuit protection, open circuit protection and overload protection.
LED Spot light Dimension
LED Spot light Eelectric Connection Diagram
LED Spot light Dimension Installation
1 Cut off the power supply before replacing the light
2 Make sure the power-supply voltage is correct before use, or it will shorten the life time or damage it
3 Do not touch the bottom of the metal parts with any part of the body when the lamp is working, or there will be danger of electric shock
4 Ventilated to maintain the working environment
5 Do not touch the bulb surface when the light is on.
1 Cut off the power supply before replacing the light
2 Make sure the power-supply voltage is correct before use, or it will shorten the life time or damage it
3 Do not touch the bottom of the metal parts with any part of the body when the lamp is working, or there will be danger of electric shock
4 Ventilated to maintain the working environment
5 Do not touch the bulb surface when the light is on.
LED Spot lightt Test Report
LED Spot lightt Test Report
LED Spot light Illuminance
没有评论:
发表评论