Technical Parameters
| Parameter | Value |
| Total power consumption | 14±1W |
| LED consumption | 11±1W |
| Input voltage | AC90-250V |
| Working Frequency | 50/60Hz |
| Power supply | built-in constant current |
| Lighting source | low powers 3528 LEDs |
| LED quantity | 180pcs |
| Dimension | 44*44*872mm |
| Material | PC cover transparent |
| Lamp holder | G5 |
| Luminous flux | 1100 ±10%lm |
| Luminous efficiency | 70–80lm/W |
| 1. frosted | |
| Cover (for choice) | 2. stripe |
| 3. transparent | |
| Color Tem (for choice) | 2700-3300K |
| 3500-4500K | |
| 5500-6500K | |
| Viewing angle | ≤120 degree |
| CRI | >70Ra |
| Working temperature | 20-40°C |
| Environment humidity | <95% |
| Working environment | indoor use |
| Protection rating | IP44 |
| Life-span | >30,000hours |
| Weight | 310g |
| Certification | FCC,CE, RoHS and UL pending |
| Warranty | 3years |
Installation
Hanging or Mounted
1 Drill 2 holes on the wall, put the expansion rubber plug into the wall
2 Screw the spring
3 Connect the plug cable with the bracket
4 Fix the bracket into the spring
5 Connect the wire, blue for “+”, yellow for ground.
Attentions:
1 Before installation, check whether the power is suitable. The tube must work under the right voltage according to the specification.
2 Cut off the power first for safety
3 Don’t take the tube apart
4 Recommend indoor use
5 Please use it in a ventilation environment and keep it from water.
6 DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative), you will create a short circuit!
没有评论:
发表评论